Skip to main content
 

徹底分析你的騎乘數據

GIANT DASH自行車碼錶帶你分析成為登山王的秘密，DASH碼錶能徹底分析你的騎乘數據，頁面設定、訓練以及連線都更加容易，與Stages共同開發的GIANT Dash L200與M200碼錶，精準的解析你的騎乘。

輕鬆操作

只要下載Stages Cycling App並與碼錶連線，所有設定皆能以手機完成。

在苹果商店下载

在 Google Play 上下载

有关开始使用 Dash M200 或 L200 自行车码表的更多信息，请单击此处。

全面連線

Ÿ   透過ANT+與Bluetooth連線，能與多項智慧產品連線，包含功率計、心率計、智慧訓練台、智慧車燈等

Ÿ   能與捷安特E-bike直接配對連結，查看助力模式、動力輸出與剩餘電力等騎乘資訊

完全集成

軟體整合

與手機通訊串聯後，資料上傳、與第三方軟體串聯、手機來電&簡訊通知，皆能自動同步，迅速完成。

READY WHEN YOU ARE

Smart Profile 會依據連接上的設備，自動為你顯示該設備的數據頁面，可能是你的公路車、登山車、礫石車或E+bike。想要增加更多的資訊頁嗎?沒問題，直接進行新增即可。

仪表板上的智能配置文件

全面客製頁面

使用 Stages Link APP，可以快速設定你需要的訓練頁面與資訊。

可定制的电脑

與GIANT E+BIKE電輔車相容

能與捷安特E-bike直接配對連結，查看助力模式、動力輸出與剩餘電力等騎乘資訊。

electric bike ready

開始訓練吧!

智慧訓練台連線
Dash碼表能自動連線至發射ANT+訓號的智慧訓練台，你也可以透過不同的模式來控制來控制訓練台阻力。
訓練計畫&課表隨存隨用
下載你的訓練課表FIT.檔，或是GPX.檔案至Stages Link APP，接著與你的碼表同步後就能立即使用。
數據分析
以視覺化的圖表分析你得每一次騎乘，審視每一次騎乘將是進步的開始。
decode computer data

導航地圖

選擇你的目的地
Dash碼錶預先安裝了自行車的騎乘路線，並以顏色區分為公路、小徑或自行車道，且地圖上會標明自行車店、廁所或是咖啡廳等資訊。
儲存路線擋案
16GB大容量儲存空間，匯入.FIT、.GXP、.TCX等路線檔案，除顯示路線導航及轉彎提示，更以彩色標記顯示路線坡度。
Map features

DASH CYCLING COMPUTERS

Dash M200 Computer
Dash M200 Computer
Dash L200 Computer
Dash L200 Computer

FAQ

  • The M200 features a compact 2.2” screen and the L200 features a larger 2.7” screen
  • Battery size is different to compensate for screen size difference
  • The standard mount included with each computer is different to compensate for size difference
  • Other than this, the computers are identical

  • A quick start guide with QR code
  • the Dash M200 or Dash L200 head unit
  • An out-front mount for a 31.8mm handlebar
  • A tether for extra safety
  • USB-A to micro USB charge cable

  • Pull back the rubber flap over the charge port and use the USB-A to micro-USB cable with your computer or any common USB wall charger.
  • The rubber flap over the charge port protects against dirt, but the charge port is also waterproof by itself.

Yes, You must fully charge your Dash computer before using it for the first time. This wakes up the lithium-ion battery from sleep mode and makes sure your Dash will have optimal run time.

  1. Make sure your Dash is updated to the latest firmware version and reboot. Click here for the latest firmware update.
  2. Make sure your Dash is fully charged with Sleep Mode disabled and let it run until the battery is fully drained. Fully charge Dash again and the battery level indicator will recalibrate.

When the battery level drops below 20%, Battery Saver Mode will activate to give 2 to 3 more hours of running time.

  • Open the Stages app on your smart phone.
  • Go to ‘PROFILE’.
  • Select the ‘CONNECTIONS’ tab.
  • Select the 3rd party app you’d like to connect to and follow the on-screen instructions.
  • Provide log-in data.
  • Enable up and downloading.

  • Turn on both your Dash and the sensor
  • On your Dash, Go to ‘CONNECTIONS -> MANAGE SENSORS -> ADD SENSOR’.
  • Select ANT+ or Bluetooth depending on your sensor
  • Select sensor from list.
  • If multiple sensors are around, they are sorted by signal strength. If you don’t know which one you need, take the sensor to a place away from other sensors so it appears at the top of the list.
  • Select ‘ADD TO ALL PROFILES’

Yes! Both the Dash M200 and L200 computers are fully compatible with ANT+ or Bluetooth compatible devices from other brands such as lights, smart trainers, radars, power meters, E-bikes and more!

  • Both Dash M200 and L200 computers come with a standard out-front mount.
  • Both computers use the industry-standard ‘Garmin-style’ quarter-turn mount for normal ‘portrait’ orientation.
  • If you use a ‘Wahoo-style’ mount, the computers can be used in ‘landscape’ mode.
  • Giant offers a wide variety of dedicated out-front mounts for drop bar aero, road and gravel bikes as well as over the stem mounts in both 31.8 and 35mm diameter for mountain and other flat bar bikes.
  • Dash computers are compatible with all ‘Garmin-style’ mounts from other brands.

Press the side button for two seconds

In the unlikely event of an unexpected issue or crash, press the side button for seven seconds. This will erase data from the current ride and reboot the unit. This action is not recommended and if you are experiencing frequent issues, please contact Stages technical support.

  • Download and install the Stages app on an Android or iOS device.
  • Create an account if you don’t have one and open the app.
  • In the Stages app go to the Bluetooth tab at the bottom of the screen.
  • Choose ‘ADD DEVICE’ and tap on QR code you see on the screen.
  • On your Dash, go to ‘CONNECTIONS -> PHONE -> Pair with Stages Cycling app’.
  • Scan the QR code on the Dash with your phone the Dash will do the rest!

  • Turn on your Dash, in range of the Wi-Fi network you want to use.
  • In the Stages app go to the Bluetooth tab at the bottom of the screen and select your Dash.
  • Use the tabs to navigate to ‘GENERAL’.
  • Tap ‘Wi-Fi’.
  • Select an available network.
  • Input the Wi-Fi network password.
  • Your Dash will directly connect to Wi-Fi, independently of the phone.

  • Turn on your Dash, in range of the Wi-Fi network you want to use.
  • In the Stages app go to the Bluetooth tab at the bottom of the screen and select your Dash.
  • Use the tabs to navigate to ‘MAPS’.
  • Use ‘ADD MAPS’ and select the map.
  • Your Dash will now use Wi-Fi to download the map.
stages cycling logo

If you have any further questions about your Dash computer or App,  click here for more information.