Giant’s High Performance Grade raw carbon material is used to produce this custom frame material in our own composite factory with a high stiffness-to-weight ratio. The front triangle of these framesets is assembled and molded as one continuous piece in a proprietary manufacturing process called Modified Monocoque Construction.
This is an image carousel with thumbnail navigation. Select any thumbnail to view an enlarged version in a gallery modal. In the gallery, use the Next and Previous buttons to navigate between images, or close the modal to return to the thumbnails.
Trance Advanced 29 Frameset
Techs & Features
Advanced Composite Technology
Advanced Forged Composite Technology
A state-of-the-art high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer and stronger than similar components made from aluminum. This technology is used in critical performance parts such as Maestro Suspension rocker links.
Flip Chip - Maestro
The flip chip allows riders to quickly adjust the geometry of their Maestro-equipped mountain bike to better suit how and where they ride. It lets riders change the headtube/seattube angles and bottom bracket height via eccentric (offset, two-position) hardware located on the upper rocker arm.
Maestro Suspension Technology
Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient and independent suspension system on the trail.
OverDrive
Giant’s original oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system’s oversized headset bearings (1 1/4” lower and 1 1/8” upper for road, 1 1/2” lower and 1 1/8” upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness.
Sizing Guide and Geometry
Sizing to be used as a reference only. Please check with a local authorized dealer to determine the correct size.
Available sizes may vary from country to country.
- S
- 163 cm5’4”
172 cm5’8”
- M
- 171 cm5’7” 180 cm5’11”
- L
- 179 cm5’10” 188 cm6’2”
- XL
- 187 cm6’2” 198 cm6’6”
| S | M | L | XL | ||
|---|---|---|---|---|---|
| LOW | HIGH | LOW | HIGH | LOW | HIGH | LOW | HIGH | ||
| A | Seat Tube Length (mm) (inch) | 42016,5 | 43016,9 | 46518,3 | 49619,5 |
| A1 | Seat Post Insertion Depth (mm) (inch) | 29011,4 | 30011,8 | 33513,2 | 36614,4 |
| B | Seat Tube Angle (degrees) | 77,2° | 78,0° | 76,3° | 77,0° | 76,3° | 77,0° | 76,3° | 77,0° |
| C | Top Tube Length (mm) (inch) | 56122,1 | 55922 | 59923,6 | 59723,5 | 62624,6 | 62424,6 | 66326,1 | 66126 |
| D | Head Tube Length (mm) (inch) | 1003,9 | 1104,3 | 1204,7 | 1305,1 |
| E | Head Tube Angle (degrees) | 65,4° | 66,2° | 65,5° | 66,2° | 65,5° | 66,2° | 65,5° | 66,2° |
| F | Fork Rake (mm) (inch) | 441,7 | 441,7 | 441,7 | 441,7 |
| G | Trail (mm) (inch) | 1265 | 1204,7 | 1265 | 1204,7 | 1265 | 1204,7 | 1265 | 1204,7 |
| H | Wheelbase (mm) (inch) | 116645,9 | 116545,9 | 119547 | 119447 | 112444,3 | 112344,2 | 126349,7 | 126249,7 |
| I | Chain Stay Length (mm) (inch) | 43917,3 | 43717,2 | 43917,3 | 43717,2 | 43917,3 | 43717,2 | 43917,3 | 43717,2 |
| J | Bottom Bracket Drop (mm) (inch) | 451,8 | 351,4 | 451,8 | 351,4 | 451,8 | 351,4 | 451,8 | 351,4 |
| K | Stack (mm) (inch) | 61024 | 60423,8 | 61924,4 | 61324,1 | 62824,7 | 62224,5 | 63725,1 | 63124,8 |
| L | Reach (mm) (inch) | 42216,6 | 43117 | 44717,6 | 45618 | 47218,6 | 48018,9 | 50720 | 51520,3 |
| M | Stand Over Height (mm) (inch) | 72928,7 | 73729 | 72328,5 | 73228,8 | 74629,4 | 75529,7 | 75129,6 | 76029,9 |
| N | Handlebar Width (mm) (inch) | 78030,7 | 78030,7 | 78030,7 | 78030,7 |
| O | Stem Length (mm) (inch) | 401,6 | 401,6 | 502 | 502 |
| P | Crank Length (mm) (inch) | 1656,5 | 1706,7 | 1706,7 | 1706,7 |
| Q | Wheel Size | 29" | 29" | 29" | 29" |
Alle spesifikasjonene kan endres uten varsel.