Skip to main content

NeosTrack은 GIANT의 첫 번째 GPS 속도계로 네비게이션과 훈련 기능을 모두 제공합니다. 파워미터, 심박계, 스피드/케이던스 센서 그리고 스마트 트레이너 등 모든 트레이닝 액세서리와 호환가능하여, 프로 레벨의 퍼포먼스를 발휘합니다. 




NeosTrack은 Di2 지원 기능을 제공하여 Dura-Ace 9150, Dura-Ace 9070, Ultegra 6870 Di2, 그리고 Ultegra 6770의 Di2 정보와 현재의 기어비 및 변속 조합을 화면에 표시합니다. 또한 화면에서 Di2 배터리 잔량을 간편히 확인할 수 있어 남은 배터리 용량과 충전 시기를 확인할 수 있습니다.


LTHR/FTP 테스트 프로토콜과 훈련 계획 기능을 포함한 TrainSmart 기능은 라이더의 신체 상태를 추적하고 목표에 맞춘 커스텀 훈련을 가능케 합니다. TrainSmart 기능으로 프로처럼 훈련하십시오.

  • MHR/LTHR/FTP/MAP를 측정하기 위해 사전에 프로그램 된 워크아웃
  • FTP, MAP, MHR, LTHR 또는 HR 값을 기반으로 적절한 인터벌을 설정해 상세한 워크아웃을 계획하십시오.


주행 데이터를 분석하기 위해 NeosTrack에 기록된 주행 정보를 동기화 하거나 TrainingPeaks 혹은 STRAVA와 연동하여 파워 분석 데이터를 포함한 주행 또는 훈련 정보를 자동으로 업데이트 할 수 있습니다. 자신의 최고 기록을 알아내고 훈련 계획을 수정하십시오. 모든 주행 경험을 기록하고 친구들과 공유하십시오.

  • NeosTrack 앱 / TrainingPeaks / STRAVA 자동 동기화
  • 차후 계획: NeosTrack을 이용한 TrainingPeaks 클래스 제공



과학적인 훈련은 라이더의 실력을 효과적으로 향상시킵니다. GIANT NeosTrack GPS 속도계는 전문적인 사이클리스트를 위한 최상급 훈련 데이터부터 초급 라이더를 위한 기본적인 주행 정보까지 다양한 정보를 제공합니다. 또한 주요 트레이닝 데이터에 즉각적으로 접근할 수 있어 자전거 위에서의 퍼포먼스를 향상시키는데 도움을 줍니다. 초보 라이더 역시 얼마나 멀리, 빠르게 달렸는 지를 파악할 수 있어 효과적인 운동 목표를 설정할 수 있습니다.

1 2 3 4 5 6 7 8 하이라이트


Basic Settings

I do not receive a GPS signal on my Neostrack.

In most cases, a GPS signal should be acquired within 1 minute of turning on your Neostrack in an open environment. In some cases, it may take up to 5 minutes to find your current position. For instance:

  • The first time using Neostrack
  • Starting your Neostrack after a long period of not using.
  • If the Neostrack has been relocated without using it (such as after traveling by plane or train).
  • The Neostrack memory is mostly full. This can delay the start up procedure. Please delete unneeded ride history from the Neostrack and retry.

If it takes longer than 5 minutes to acquire a GPS signal, turn the device off, make sure that you are in an open area, without tall buildings or trees around you, then, retry turning the device on to restart the GPS signal search procedure.

How can I set the time on my Neostrack?

Make sure the daylight-saving time is in the correct setting. Go to menu (Setup>System>Time/Unit> Dlight Save) and adjust the daylight saving setting per your time zone. When your Neostrack acquires a GPS signal, the time should set automatically.

My Neostrack is frozen.

Press the bottom button for 3 seconds to turn off the Neostrack. If the Neostrack does not turn off, hold the bottom and right-side buttons for a few seconds to reset your Neostrack (*note: resetting the device will delete all activities stored on the Neostrack device).

My speed and distance data are incorrect.

Make sure you have the correct wheel size dimension entered in your Neostrack. An incorrect wheel size can result in false speed and distance data displayed when using a speed sensor or Speed/Cadence sensor.

The altitude shown on my Neostrack is incorrect.

Altitude on Neostrack can be set up manually based on your current location. Go to menu (Setup>System>Altitude>Altitude) and adjust to the correct altitude.

The Neostrack has fog or moisture underneath the screen. Why is this?

The Neostrack altitude function based on barometric pressure. The pressure sensor is covered by a Gore-Tex membrane that is water resistant but is not waterproof. Under certain circumstances (significant humidity or temperature changes) it is normal for the screen to become temporarily foggy due to extreme humidity/temperature changes. This condition should self-correct if power charge cap is left open and Neostrack is left screen-down overnight. If the screen does not return to normal within 24 hours, please contact your local Giant Bicycles retailer for assistance.

My PC or Mac cannot recognize my Neostrack when I connect with a USB cable.

Press the bottom button for 3 seconds to restart your Neostrack, then turn your Neostrack on again to reconnect.

Sync Settings

I sync my Neostrack via Wi-Fi, but I cannot find my riding data in either Neostrack App or website.

The Neostrack UUID needs to be paired with the Neostrack App before performing data sync via Wi-Fi.

My Neostrack does not connect via Bluetooth with my cell phone.

Please make sure your cell phone operating system software version update to Android 5.0 or newer or iOS version 8.0 or newer. Turn on GPS location service on phone and make sure Bluetooth on both the Neostrack and cell phone are turned on. Please also note you must do Bluetooth pairing in the Neostrack App not the Bluetooth settings in your phone. In urban areas (such as high-density apartment buildings) there can be a large number of Bluetooth devices present, which can cause interference. Please turn the Bluetooth function on your cell phone off and then on again (or turn the cell phone off and on again). Then retry uploading via Bluetooth.

Neostrack App cannot pair with my Neostrack UUID, or my cell phone cannot connect with my Neostrack.

For security, each Neostrack computer can only be paired and synced with one Neostrack App account. You may encounter issues due to your device being paired with different accounts. Signing up separately using Facebook, STRAVA™ and email will create multiple user accounts. Please ensure information is stored in only one account to avoid confusion, use only this account to log-in to the Neostrack App and website.

I cannot upload my activities from my Neostrack to the Neostrack App or the website via Bluetooth or Wi-Fi.

Please make sure you press the recording button before your ride. If the problem persists, reset your Neostrack and re-sync it with your Neostrack App.

Please make sure you have stopped recording you activity correctly before attempting to upload or sync your ride data. Not doing so can result in incomplete data files, which may not upload correctly. Please see the Neostrack Quick-Start Guide or Detailed User Manual for correct recording start/stop procedures.

The data uploaded on STRAVA™ that is different from the date on Neostrack App or website.

STRAVATM has its algorithm to calculate the data. The Neostrack App is Google Maps-based. Sometimes there are discrepancies between the two platforms.

The Neostrack App failed to sync my activities to STRAVA™ or TrainingPeaks™.

You must upload data to Neostrack App first then auto sync to STRAVA™ or TrainingPeaks™. If you have already attempted a data sync without having the account paired and wish to still upload your ride data to STRAVA™/TrainingPeaks™, you can do so manually by connecting the device to your PC or Mac and uploading the .fit files directly on the STRAVA™/TrainingPeaks™ websites.

Sensor Settings

I don’t see speed data on my Neostrack when using a speed sensor (for indoor training).

Turn off the GPS function and set up the speed sensor as the main speed source. Go to Menu (Setup>Bike Data>(if you have more than one bike, select the bike in question)>Speed source>Priority 1>Speed/CAD)

My Neostrack does not pair with my Shimano Di2.

A Shimano D-Fly Management System is required to pair Shimano Di2 with Neostrack. You need to purchase and install a Shimano D-fly module for Bluetooth data to be transmitted by the Shimano Di2 group-set.

I paired my power meter or my Shimano Di2 system with my Neostrack, but the information does not show on my Neostrack.

Ensure you are using the correct bike profile and that there is no other bikes within 5 meters when pairing. Go to menu (Setup>Bike Data>(if you have more than one bike, select the bike in question)>Sensors>Power or Di2)

Neostrack can be set up with a maximum of seven bike profiles; each bike profile can pair more than one sensor individually, therefore make sure to set the correct sensors to the right bike profile. Sensors being used across multiple bike profiles will need to be paired again with each new bike profile.

I cannot detect or pair any sensors with my Neostrack.

Ensure the sensor battery has enough power. If not, please replace with a new battery (noting correct battery orientation). If the sensor is brand new, remember to remove the protective battery tab before use.

Go to menu (Setup>Bike Data>(if you have more than one bike, select the bike in question)> Sensors

I’m unable to login to the Neostrack App?

The Neostrack App has three ways to create an account via Facebook, STRAVA™, or e-mail. Please sync to only one and remember which account you are using.

  • Please note, if you already paired your device UUID with Facebook, you have to use Facebook to login. If you use your STRAVA™ account to login, it will not recognize the account you created using Facebook.
  • If you use an E-mail account to login and you forget your password, select the link “Forget Password” to reset your password. You will receive an email with your account information; please remember your Email login details to access the password reset.
  • If you cannot remember which login method your Neostrack app account uses to login or that is already paired with your device UUID. Please send an email to Giant and provide your device UUID. We will investigate and remove the account link for your device. Then, you need to create a new account and begin the account/device pairing process again.


I downloaded a GPX route from a third-party website and uploaded it into the Neostrack, but I cannot find the route or turn by turn instructions on my Neostrack when using the “Route” function.

Compatibility with all GPX files from a third-party source cannot be guaranteed. The Neostrack only supports the Neostrack App and Neostrack website when planning a route. GPX routes from third-party websites may not display at all or may display errors, such as turn by turn function, street naming, etc.

Bicycle routes are not specified in the Plan Route function on the Neostrack App or website.

The Neostrack map is based on Google Maps. In some countries, bicycle routes are not available or designated on Google Maps.