
Technologies
Giant est le leader en matière de vélos de haute performance afin de vous offrir une meilleur expérience. Vous pouvez trouver ces technologies innovatrices sur nos vélos.
Bike Technologies & Features
Technologie de Composite Advanced
Technologie de Composite Advanced SL
Technologie de Composite Advanced Forged
Technologie d'aluminium ALUXX
Technologie d'aluminium ALUXX SL
Technologie d'aluminium ALUXX SLR
Technologie AeroSystem Shaping
Technologie de Composite CoMax
Design compact de route
Technologie Compliance Tuned
Technologie D-Fuse
EnergyPak - Top Pull
Technologie de Suspension FlexPoint
FlexPoint Pro Suspension Technology
Developed as a superlight rear suspension setup for XC bikes that demand efficiency, control and responsive handling, FlexPoint Pro is a linkage-driven, single-pivot system that delivers 100mm of rear-wheel travel. It’s engineered with a full-composite swingarm that significantly reduces overall frame weight.
Flip Chip
Flip Chip - Maestro 3
Flip Chip - Dropout
Allows riders to quickly adjust the geometry and rear-wheel tire clearance with eccentric, offset two-position hardware in the rear wheel dropouts.
Flip Chip - Dropout DH
A quick and simple adjustment on the new Glory Advanced lets you fine tune your bike for the way you ride. A two-position flip chip located on the rear dropout changes the rear-center measurement so racers can get the best performance out of the bike depending on their riding style and terrain.
Flip Chip - Headset
This new three-position flip chip at the headset area of the Glory Advanced lets riders quickly fine-tune cockpit dimensions and geometry for their riding style and terrain.
Tige de selle intégrée
Serrage de tige de selle interne
Technologie de suspension Maestro
OverDrive 2
OverDrive
OverDrive Aero
Found inside the head tube of the all-new Propel range, the D-shaped fork steerer tube and corresponding spacers provide an extremely aerodynamic, easier to service system of internally routed brake and derailleur cables.
PowerCore
RideSense
RideSense Ready
Tige de selle Variant
Tige de selle Vector
Vector Integrated Seatpost
The integrated vector seatpost saves weight compared to standard composite posts, while improving aerodynamics and adding road-smoothing compliance.
E-Bike Technologies & Features
EnergyPak
Technologie Hybrid Cycling
RideControl Charge
RideControl Charge combines all functions in one device. It displays the EnergyPak capacity, which power assist mode is being used, and speed or total distance. Its sleek design provides an ergonomic, handlebar-mounted control center so that the support levels can be accessed easily and comfortably. RideControl Charge also offers convenient charging with its user-friendly USB charger. And now Giant E-bikes can be wheeled along more easily with our new Walk-Assist function.
RideControl Dash
This two-in-one unit features buttons to control support modes plus an integrated color display. You can check range, battery level and support mode, along with standard cycling data such as speed and distance without having to another screen to the E-bike. It also has an ANT+ connection so you can connect a heart rate monitor and other fitness devices.
RideControl Ergo
RideControl Ergo 2
This new control unit is optimized for city and trekking bikes that don’t have front derailleur or dropper seatpost levers on the handlebar. It’s optimized for ergonomics, with larger buttons that are easy to reach. LEDs indicating battery level and support mode make it a standalone control unit that doesn’t require a display. A smaller 6mm connector makes it possible to have internal handlebar cable routing.
RideControl Ergo 3
RideControl EVO
RideControl Go
RideControl ONE
RideControl ONE takes your E-bike riding experience to new levels with integrated button controls and a clean handlebar free of any display. The E-bikes equipped with RideControl ONE can connect with the Giant E-bike App to function as your E-bike display
RideDash Evo
The RideDash EVO is completely revised for 2021. It has a sportier outlook with a full-color display and graphics showing new functionalities to enhance the E-bike riding experience. It has handlebar/stem integration options and a reliable, wired connection. The low-profile screen shows ride information including speed, distance, battery range and Navigation, heart rate and fitness require the app to be connected.
RideDash Plus
For our E-bikes equipped with RideControl One ANT+ or with Smart Gateway technology, the RideDash Plus unit can be used as an additional display. It shows important information including range, battery level and support mode along with standard cycling data like speed, distance and trip information. The RideDash Plus offers a larger screen and more modern design compared to the RideDash.
Smart Assist
All SyncDrive motors have Smart Assist technology, which adjusts the support to match the rider’s needs. By using information from multiple sensors, both rider input and terrain feedback are used to determine the optimal amount of pedaling assistance. SyncDrive is the only e-bike system that utilizes both rider input and terrain feedback. It gives you a smooth, natural riding experience with ample power when you need it, while also conserving power when you don’t need as much.
SyncDrive Pro
SyncDrive Pro System
The SyncDrive Pro system, powered by the new Shimano EP8 motor, is a customized powertrain with 85Nm that produces smooth acceleration on paved roads, gravel or dirt. You can switch support modes using Shimano Di2 shift levers, allowing for a clean cockpit setup without an additional control unit.
SyncDrive Sport
Innovation, manufacturing expertise and a motor system powered by Yamaha all combine to expand any rider’s abilities. SyncDrive Sport offers three support modes and is equipped on E-bikes that are used for both everyday riding and for more demanding off-road riding. This small mid-drive motor delivers a massive maximum 80Nm of torque and is widely acclaimed for its performance and reliability.
SyncDrive Life
The Giant SyncDrive Life is the ideal solution for E-bikes with low step-through frames. This compact, mid-drive motor ensures perfect weight distribution, which makes the E-bike more stable and balanced. Centralized mass leads to a natural weight balance while riding and while stopped. SyncDrive Life helps you ride with comfort and freedom, delivering a maximum 60Nm (Newton Meters) of torque with proven performance and reliability.
Syncdrive Core
SyncDrive Core is a compact and lightweight motor, making it ideal for E-bikes used for daily transportation or recreation. It has Smart Assist technology, featuring six sensors including a slope detection sensor and an accelerometer. These sensors allow the motor to produce power based on rider input and the terrain, so there is no need to select a certain assist mode. You can simply ride the same way you normally would, but
with more power. The result is an extremely comfortable and natural riding experience. SyncDrive Core delivers a very quiet performance that’s also powerful, with tunable support ratios up to 360 percent.
SyncDrive Move
SyncDrive Move is an all-new front hub motor that is lightweight and extremely quiet. Ideal for city bikes and recreational riding, it delivers up to 20Nm of power output and five support levels (Power, Sport, Active, Basic, Eco) to help riders accelerate with speed, climb hills with less effort, and maintain speed while riding against the wind. SyncDrive Move also features Smart Assist technology, which uses five sensors to determine the exact amount of pedaling support needed for a smooth, natural riding experience
SyncDrive Move Rear
This rear hub motor delivers up to 30Nm of pedal assistance in a lightweight, quiet system. It features 3 support levels (Power, Active, Eco) to help riders climb hills with less effort. It also features Smart Assist technology, which uses five sensors to determine the exact amount of pedaling support needed for a smooth, natural riding experience.
Gear Technologies & Features
BRS BERENIS GRAVEL™
Crest 34 Suspension Fork
Building on our over 40 years of expertise in the science of bicycle and bicycle component manufacturing, Giant introduces the Crest, our all-new, fully tunable suspension fork that brings plush action and precise control to more riders everywhere.
Corecomfor™
Dynamic Balanced Lacing
Dynamic Cycling Fit
EasyRide Tubeless
E.I.T. Liege™
E.I.T. Ronde™
ExoBeam
ExoWrap
Technologie sans crochet
Moyeu à faible friction
Motion Efficiency System
Mips
Mips Air Node™
Mips Air Node™ is a super light and slim helmet security system that moves 10-15 mm in relation to the helmet’s energy-absorbing layer, reducing the rotational forces that are otherwise transmitted to the brain during impact. Fully integrated into the helmet’s padding, Mips Air Node™ is as light as possible and designed to fit each individual helmet model and size, making it virtually invisible until needed.
Magnetic Fidlock®
Magnetic Fidlock® helmet buckles are intuitive, pinch-free and can be opened or closed with one hand, even while wearing gloves.
MIK
Particle Flow
Power Halo
Power Pro
Procomfor™
EliteComfor™
With 3D multi-density memory foam for perineal and ischial protection, lateral shaped wings that adapt to body movement, and elastic micro-fiber performance fabric for maximum moisture transfer, The ELITECOMFOR™ chamois gives elite riders maximum performance.
TOP INTERFACE LAYER Elastic micro-fiber with high memory padding is strategically positioned at key contact points.
MID INSERT LAYER Calibrated to give maximum protection to the perineal and ischial areas, it reaches a maximum density of 120 kg/m³.
BASE LAYER Soft and flexible lateral-shaped wings follow body movements and help give a smooth pedal stroke.
ProTextura™
ShieldTextura™
Sportcomfor™
BRS Berenis Mustang
The Berenis Mustang chamois adapts high density PRO EVO foam to offer extra protection on long, intense rides.
TOP INTERFACE LAYER Featuring BRS Berenis Premio ECO fabric, a superfine polyamide technofiber with hydrophilic features; super soft to the touch with enhanced moisture management and quick drying properties.
MID INSERT LAYERReticulated PRO EVO foams feature hydrophobic treatment and high-lift capacity with high foam density for extra protection on long rides.
BASE LAYER The perforated foam base layer provides maximum breathability and moisture wicking.
BRS Berenis Core Evo
Berenis Core Evo chamois features a wide shape, 3D wing design and a gradual transition between foam levels for increased comfort for more riders everywhere.
TOP INTERFACE LAYER Touch Evo fabric with micro longitudinal channels is soft, elastic, and has high abrasion resistance. A unique micro structure also makes it moisture wicking and quick drying.
MID INSERT LAYER Medium density and high lift capacity foam insert to ensure maximum comfort.
BASE LAYER Perforated foam base layer provides maximum breathability and moisture wicking.
SXC Suspension Fork
The SXC 32 fork sets a new benchmark for sport-level suspension performance. With a chassis directly derived from the acclaimed Crest fork and featuring a forged crown and hollow bridge lowers, the SXC 32 offers a superior combination of robust strength, suspension performance and light weight.