FLIP-CHIP COMBINATION OVERVIEW Geometry Charts
Reign > Adjustable Enduro Geometry

A new three-position flip chip gives riders the ability to adjust the geometry of the new Reign Advanced Pro and Reign to suit their riding style and terrain. Located on the upper rocker arm of the Maestro suspension system, the flip chip offers bottom bracket drop adjustments in 5mm increments (35, 30 or 25mm) and also lets you change the head tube angle (63.5. 63.9 or 64.2 degrees) and seat tube angle (78.3, 78.7 or 79 degrees).

The high position of the flip chip increases ground clearance, a good option for tighter, more technical terrain. In this position, the steeper seat tube angle helps you power up climbs. Put the flip chip into the low position, and the head tube gets slacker and the bottom bracket drops. This gives the bike more confident handling at higher speeds. For those who want a more neutral setup, the middle position is a versatile option.

The flip chip also allows riders to choose a mixed wheel setup by swapping out the 29-inch rear wheel for a 27.5 option. The stock 29-inch rear wheel optimizes stability and roll-over capabilities, while a 27.5 option delivers a more agile, snappier feel and more saddle-to-tire clearance in the rear. Some riders prefer this “mullet” setup for steep, technical terrain.

FLIP-CHIP COMBINATION OVERVIEW

REIGN ADVANCED PRO / REIGN

Sizes S, M, L, XL29 Front, 29 Rear29 Front, 27.5 Rear
HighYesYes
MidYesYes
LowYesYes

Reign SX

Sizes M, L, XL29 Front, 29 Rear29 Front, 27.5 Rear
HighNoYes
MidNoYes
LowNoNo

Geometry Charts

This all-new Flip Chip - Maestro 3 technology allows riders to quickly adjust the geometry of the all-new Reign and choose a rear wheel size (29-inch or 27.5-inch) for their riding style and terrain. The adjustment affects head tube and seat tube angles, bottom bracket height, and rear-wheel size using eccentric flip chip hardware located on the upper rocker arm of the rear suspension.

Reign Advanced ProS-low / 29 or 27.5S-mid / 29 or 27.5S-high / 29 or 27.5M-low / 29 or 27.5M-mid / 29 or 27.5M-high / 29 or 27.5L-low / 29 or 27.5L-mid / 29 or 27.5L-high / 29 or 27.5XL-low / 29 or 27.5XL-mid / 29 or 27.5XL-high / 29 or 27.5
A - Seat Tube Length400400400425425425450450450475475475
B - Seat Tube Angle (degrees)78.3, 77.5178.7, 77.8779.0, 78.2578.3, 77.5478.7, 77.8979.0, 78.2677.3, 76.5677.7, 76.9178.0, 77.2677.3, 76.5977.7, 76.9278.0, 77.27
C - Top Tube Length556, 557.6555, 556.9555, 556.1587, 588.6586, 587.8585, 587.00620, 622.3620, 621.4619, 620.5652, 654.4652, 653.5651, 652.6
D - Head tube length100100100105105105115115115120120120
E - Head Tube Angle (degrees)63.5, 62.7163.9, 63.0764.2, 63.4563.5, 62.7463.9, 63.0964.2, 63.4663.5, 62.7663.9, 63.1164.2, 63.4663.5, 62.7963.9, 63.1264.2, 63.47
F - Fork Rake444444444444444444444444
G - Trail140, 147138, 144135, 141140, 147138, 144135, 141140, 147138, 144135, 141140, 147138, 144135, 141
H - Wheelbase121412131212124612451244127112701269130413031302
I - Chainstay Length445443442445443442445443442445443442
J - Bottom Bracket Drop35, 2930, 2425, 1935, 2930, 2425, 1935, 2930, 2425, 1935, 2930, 2425, 19
K - Stack627, 633624, 630622, 627632, 638629, 635626, 632641, 647638, 644635, 641645, 652642, 649639, 646
L - Reach426, 418430, 421434, 426456, 448460, 452464, 456476, 468480, 471484, 476506, 499510, 503514, 507
M - Stand over height720, 711724, 715729, 719735, 725739, 729744, 734751, 741756, 746760, 751746, 735751, 740756, 745
N - Handlebar Width800800800800800800800800800800800800
O - Stem length404040404040404040404040
P - Crank length165165165170170170170170170170170170
Q - Rear Wheel Size29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"
ReignS-low / 29 or 27.5S-mid / 29 or 27.5S-high / 29 or 27.5M-low / 29 or 27.5M-mid / 29 or 27.5M-high / 29 or 27.5L-low / 29 or 27.5L-mid / 29 or 27.5L-high / 29 or 27.5XL-low / 29 or 27.5XL-mid / 29 or 27.5XL-high / 29 or 27.5
A - Seat Tube Length400400400425425425450450450475475475
B - Seat tube angle (degrees)78.3, 77.5178.7, 77.8779.0, 78.2578.3, 77.5478.7, 77.8979.0, 78.2677.3, 76.5677.7, 76.9178.0, 77.2677.3, 76.5977.7, 76.9278.0, 77.27
C - Top tube length556, 557.6555, 556.9555, 556.1587, 588.6586, 587.8585, 587620, 622.3620, 621.4619, 620.5652, 654.4652, 653.5651, 652.6
D - Head tube length100100100105105105115115115120120120
E - Head tube angle (degrees)63.5, 62.7163.9, 63.0764.2, 63.4563.5, 62.7463.9, 63.0964.2, 63.4663.5, 62.7663.9, 63.1164.2, 63.4663.5, 62.7963.9, 63.1264.2, 63.47
F - Fork Rake444444444444444444444444
G - Trail140, 147138, 144135, 141140, 147138, 144135, 141140, 147138, 144135, 141140, 147138, 144135, 141
H - Wheelbase121412131212124612451244127112701269130413031302
I - Chainstay Length445443442445443442445443442445443442
J - Bottom bracket drop35, 2930, 2425, 1935, 2930, 2425, 1935, 2930, 2425, 1935, 2930, 2425, 19
K - Stack627, 633624, 630622, 627632, 638629, 635626, 632641, 647638, 644635, 641645, 652642, 649639, 646
L - Reach426, 418430, 421434, 426456, 448460, 452464, 456476, 468480, 471484, 476506, 499510, 503514, 507
M - Stand over height723, 714727, 718732, 723743, 733747, 738752, 742756, 746760, 750765, 755771, 76277, 766782, 771
N - Handlebar width800800800800800800800800800800800800
O - Stem length404040404040404040404040
P - Crank length165165165170170170170170170170170170
Q - Rear wheel size29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"29" or 27.5"

Reign Range

Reign Advanced Pro
Reign Advanced Pro
Reign
Reign
Reign SX
Reign SX