Technologien

Giant optimized reinforced layup places extra maximum-strength carbon fiber only where needed, creating a robust structure at minimal weight.

The proprietary “D” shaped composite seatpost damps vibration, resulting in a smooth, compliant ride.

This range extender can boost total capacity by 280Wh. This gives you the choice—lighter weight for everyday rides or longer range for epic ride days.

Developed as a superlight rear suspension setup for XC bikes that demand efficiency, control and responsive handling, FlexPoint Pro is a linkage-driven, single-pivot system that delivers 100mm of rear-wheel travel. It’s engineered with a full-composite swingarm that significantly reduces overall frame weight.

This all-new technology allows riders to quickly adjust the geometry and choose a rear wheel size (29-inch or 27.5-inch) for their riding style and terrain. It’s available on select Maestro-equipped mountain bikes. The adjustment affects head tube and seat tube angles, bottom bracket height, and rear-wheel size using eccentric flip chip hardware located on the upper rocker arm of the rear suspension.

A quick and simple adjustment on the new Glory Advanced lets you fine tune your bike for the way you ride. A two-position flip chip located on the rear dropout changes the rear-center measurement so racers can get the best performance out of the bike depending on their riding style and terrain.

This new three-position flip chip at the headset area of the Glory Advanced lets riders quickly fine-tune cockpit dimensions and geometry for their riding style and terrain.

Found inside the head tube of the Defy, Propel and TCR ranges, the D-shaped fork steerer tube and corresponding spacers provide an extremely aerodynamic, easier to service system of internally routed brake and derailleur cables.

The integrated vector seatpost saves weight compared to standard composite posts, while improving aerodynamics and adding road-smoothing compliance.

The E-Lock disables motor support and digitally locks the bike via app, remote, or PIN. If moved without authorization, an audible alarm sounds instantly, ensuring peace of mind and real protection every time you stop.

Aegis Radar detects approaching vehicles from behind and displays alerts directly on the display, supporting rear awareness in traffic.

Integrated 560Wh battery pack powers a 48-volt system that produces more power with less heat and stress on the battery cells. Exceptionally durable, it delivers up to 2300 full charge cycles—more than any other E-bike battery—and recharges rapidly, reaching 80% battery capacity in as little as two hours.

The updated RideControl App expands the existing customization options for your SyncDrive motor. Now you choose exactly how you want the system to perform. You can use the app to adjust from the battery-saving Eco mode all the way up to Power mode, and collect all relevant ride metrics during your activity.

This updated control unit is cleanly integrated with the handlebar/grip featuring ergonomic buttons to control support modes. The high-resolution color screen has an anti-fog design that displays range, battery level and support mode, speed and distance, and turn-by-turn directions.

The new RideControl Ergo 4 builds on the previous generation Ergo 3 with a sleek, grip-integrated 3-button remote control unit. It blends seamlessly with your handlebar and grips and has a larger, more concave shape and improved tactile feedback.

This updated motor features a magnesium casing that reduces weight to just 2.5kg while still delivering 85Nm of torque and retaining the instant engagement that characterizes SyncDrive Pro motors. It’s also engineered for a reduced noise level and quiet performance. The motor shape and dimensions allow for a narrow Q factor to ensure a natural pedaling position with minimal strain on the knees.

Powerful new 48-volt system delivers up to 800 watts of peak power while producing less heat and motor stress—improving efficiency to give you more peak power for longer. You can tune and adjust torque and support levels to match your ride. Choose full power for steep climbs, or dial it back to save energy on long rides.

Delivers up to 800 watts of peak power and 100Nm of torque for fast response, balancing high output with precise control for confident, capable trail riding. Engineered to maintain powerful assist levels even at high cadences, giving you sustained support over longer periods.

The SyncDrive Pro 2 motor delivers 85Nm of torque and up to 400% support. Powered by a 36V system, it runs cooler and more efficient, blending seamlessly with rider input for lasting, responsive performance on any terrain.

The compact SyncDrive Sport 2 motor delivers 75Nm of torque tuned for trail riding. It features Smart Assist mode, which uses six sensors to measure your pedaling input, cadence and speed, along with the slope you’re riding on. Based on these calculations, it produces power that feels naturally supportive and in sync with the way you ride. The motor’s compact shape also allows for a narrow Q-factor for optimized pedaling efficiency, comfort and biomechanics.

The SyncDrive Sport 3 motor delivers 85 Nm of torque with smooth, responsive output that stays controlled as surfaces become more demanding. Its quiet performance and compact design support confident riding across mixed terrain.

The SyncDrive Core 2 is a compact, lightweight motor delivering 55 Nm of torque with a quiet, refined ride feel. Using six sensors, it automatically matches power to rider input and terrain, providing smooth, natural assistance with up to 300 percent support for everyday riding and exploring.

This rear hub motor delivers up to 30Nm of pedal assistance in a lightweight, quiet system. It features 3 support levels (Power, Active, Eco) to help riders climb hills with less effort. It also features Smart Assist technology, which uses five sensors to determine the exact amount of pedaling support needed for a smooth, natural riding experience.

The new SyncDrive Move Plus motor delivers 30Nm of torque, which is comparable to 75Nm of torque in a mid-drive motor—all in a lightweight, quiet system that’s fully integrated into the rear hub. It features five support levels plus Smart Assist technology, which can automatically adjust pedaling support without having to change settings while riding. The motor uses sensors to constantly adjust output based on advanced algorithms.

More compact compared to a traditional road cycling pad to provide freedom of movement on transitions from road to off-road.

Featuring multi-directional curvature and a smooth surface, it provides a great fit, enhanced stability and as well as gradual transition areas. The central channel is engineered according to specific anthropometrical parameters that support male anatomy while in saddle, relieving pressure and favoring blood flow.

When your wheel hits a sharp or square edge, especially at speed, pinch flats and rim damage can occur. Wide Guard technology minimizes this risk by broadening the contact point between the rim and tire with a solid 5mm rim sidewall. That means you can skip the heavy tire inserts to have less unsprung weight on your bike and allow your suspension to perform better. The wide sidewalls also better protect your wheel from big impacts, reducing the possibility of rim damage.

Built-in storage securely holds eyewear when not in use, keeping them stable and easily accessible across varied terrain and riding conditions.

When engagement force was applied to determine how many cycles a hub can withstand before showing signs of significant wear, the TRX HE hub was five times more durable compared to benchmark competitors.

Mips® Air Node is a super light and slim helmet security system that moves 10-15 mm in relation to the helmet’s energy-absorbing layer, reducing the rotational forces that are otherwise transmitted to the brain during impact. Fully integrated into the helmet’s padding, Mips® Air Node is as light as possible and designed to fit each individual helmet model and size, making it virtually invisible until needed.

Exclusive to Giant and Liv helmets, Mips® Air Node Pro delivers advanced rotational impact protection while maintaining cooling and comfort. Using reengineered materials, COOLMAX® fiber, and smart-flow moisture channels with integrated Drop Zones, it helps keep riders cool and dry during high-intensity efforts. The lightweight system adds virtually no weight or bulk to highly ventilated helmets, while removable pads allow for quick cleaning and easy maintenance.

Magnetic Fidlock® helmet buckles are intuitive, pinch-free and can be opened or closed with one hand, even while wearing gloves.

With 3D multi-density memory foam for perineal and ischial protection, lateral shaped wings that adapt to body movement, and elastic micro-fiber performance fabric for maximum moisture transfer, The ELITECOMFOR™ chamois gives elite riders maximum performance.

• TOP INTERFACE LAYER Elastic micro-fiber with high memory padding is strategically positioned at key contact points.

• MID INSERT LAYER Calibrated to give maximum protection to the perineal and ischial areas, it reaches a maximum density of 120 kg/m³.

• BASE LAYER Soft and flexible lateral-shaped wings follow body movements and help give a smooth pedal stroke.

ShieldTextura fabric is specially engineered with high density fish-scale pattern knitting for an authentic look and soft feel with enhanced abrasion resistance and toughness.

The Berenis Mustang chamois adapts high density PRO EVO foam to offer extra protection on long, intense rides.

• TOP INTERFACE LAYER Featuring BRS Berenis Premio ECO fabric, a superfine polyamide technofiber with hydrophilic features; super soft to the touch with enhanced moisture management and quick drying properties.

• MID INSERT LAYERReticulated PRO EVO foams feature hydrophobic treatment and high-lift capacity with high foam density for extra protection on long rides.

• BASE LAYER The perforated foam base layer provides maximum breathability and moisture wicking.

Berenis Core Evo chamois features a wide shape, 3D wing design and a gradual transition between foam levels for increased comfort for more riders everywhere.

• TOP INTERFACE LAYER Touch Evo fabric with micro longitudinal channels is soft, elastic, and has high abrasion resistance. A unique micro structure also makes it moisture wicking and quick drying.

• MID INSERT LAYER Medium density and high lift capacity foam insert to ensure maximum comfort.

• BASE LAYER Perforated foam base layer provides maximum breathability and moisture wicking.

Enhanced security and anti-theft feature using Apple Find My function lets you set up separation alerts, locate your E-bike remotely, and receive notifications if its location changes. Apple Find My privacy protections ensure that your location information is encrypted on Apple servers and retained for only 24 hours.

Allows you to lock and unlock your E-bike using the RideControl App or by entering a PIN code on the controller. Once locked, pedaling assistance is blocked and the display shows the E-bike in lock status. If someone attempts to move the bike, the alarm is triggered.

In collaboration with the Insurance Institute for Highway Safety, the Virginia Tech Helmet lab tests helmets using the STAR evaluation system. The impact tests evaluate a helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. Helmets with more stars provide a reduction in concussion risk for these impacts, with 4 and 5 star ratings being the most highly recommended. Read more.